How to build a yurt?

Picture of yurt Installation steps: 1. First, all the different iron frame pipe fittings of Mongolian yurt are classified and arranged. For use. 2. Docking the upper and lower beams of the Mongolian yurt overhead frame: The upper and lower beams of the overhead frame should be docked according to the label of the pipe fittings, and the fixing screw should be tightened. 3. Butt top frame inclined column: butt the Mongolian yurt inclined column between the lower beam of the top frame and the upper beam of the top frame, and tighten the fixing screw. 4. Bottom girder frame of butt Mongolian yurt: Bottom girder should be butted according to the label of pipe fittings and fixed screw tightened. 5. butt Mongolian yurt column: butt all the columns at the interface of Mongolian yurt bottom beam frame. And tighten the fixing screw.

6. Install the yurt top cloth: Put the inflatable yurt top cloth on the yurt top rack, and point the top cloth door at the top rack door. 7. Butt Mongolian Yurt Top Frame and Mongolian Yurt Column: Lift the Mongolian Yurt Top Frame with cloth, butt it on the Mongolian Yurt Column, and twist the fixing screw. The top frame door should be aligned with the bottom beam door. 8. Tidy up the top cloth and enclosure of Mongolian yurts: All the shelves of Mongolian yurts have been docked. The top cloth and the girdle cloth of the Mongolian yurt are leveled, and the fixed rope of the Mongolian yurt cloth is tied to the skeleton. 9. Check the installation of each part of the Mongolian yurt.

If there is no mistake, the Mongolian yurt is finally built. The above is about the Mongolian yurt installation process is what the relevant content of the introduction, I believe that the above introduction will help you understand these.