How to use and build inflatable tent?

Comparing with traditional tents, inflatable tents are lighter in weight, smaller in volume, more convenient in transportation, and many of their performances are superior to traditional tents. And the key is the installation and use of inflatable tents, which is simpler and more convenient than traditional tents. Today, Huayu air model will talk about the use of inflatable tents and matters needing attention.

The use of inflatable tents is very simple. Whether large or small, inflatable tents can be built and disassembled by 1-2 people. Using high-pressure air pump matched with inflatable tents, the inflatable tents of about 100 square meters can be built in 15 minutes, and the appearance of the atmosphere, the products themselves are creative and high-end, so they are applicable. In all kinds of outdoor activities, residents and so on.

First, tell you how to build, first packed inflatable tent, open, flat the ground, and then take out the accessories inside, such as: electric inflatable pump, Ding, pull rope, repair kit. When ready, find the inflatable valve on the air column of the inflatable tent and use the connection of the air pipe of the electric inflatable pump, butt the inflatable valve, open the switch of the electric inflatable pump to inflate the inflatable tent, until the inflatable tent is fully available at the station immediately. (There are usually two inflatable valves in the large inflatable tent, please check another inflatable tent when inflatable. Whether or not the valve is tightened, otherwise it will be inflated and deflated at the same time. In the case of large wind, it is necessary to fix the inflatable tent with ground nail and pulling rope.

It's easy to build and easy to disassemble. Firstly, the nail rope for fixing the inflatable tent is removed, then the inflatable valve of the inflatable tent is twisted open, and the air is released naturally until the tent collapses. Natural ventilation still has a lot of gas is difficult to discharge, so the venting valve of the inflatable tent should be put into use at this time. Connect the air pipe of the electric inflatable pump with the venting valve, and then fold and pack the inflatable tent after the air inside is exhausted.

Of course, inflatable tents still have a lot of things to pay attention to, these things are the best way to extend the service life of inflatable tents. Before inflatable tents are built, the terrain must be carefully surveyed. There should be no rolling stones, rolling logs or weathered stones above the camp. Don't build tents near riverbanks and dry riverbeds during rainy season. In addition, in order to prevent lightning strike, do not build tents on top of hills or open fields; when installed on mud or sand, drainage ditches can be dug around the tents to ensure the dryness of the ground inside the tents.